What do you need to know to choose an Actuators or Linear Robots?

What questions to ask when choosing an actuator or linear robots to avoid selection errors

What Precision I’m looking for (Precision and repeatability), this will help us choose which family and type of product we will have to choose the solution in, and the need to have a linear coder and a closed loop on the actual position of the system.

What orientation will the system be installed? Vertical, horizontal, angled, The forces applied to the cart will be different and the gravitational force will have to be taken into account.

What speed  , and acceleration the system have to support ?  The engine capacity, Drive and, support, bearing will have to withstand the forces of acceleration and deceleration of the system and be able to deliver the required performance

What Length ? Including acceleration and deceleration zone to achieve required speed

What’s the Load ?  The weight and its distribution as well as the forces applied with their directions. Any loads deported from the rolling system will result in a moment of force, which the system must be able to withstand without introducing a position error. Any workload performed by the actuator, (cut, push, pull, polish) , Include the weight of the tool, servo motor, gearbox and other axes.

What is the work cycle, and durability required by the application

Other factors to consider, safety, brake for the load, other forces, motor manufacturer and model

What type of environment the product will be subjected to, temperature, debris, chemical, wash down , type of maintenance. Influences the selection of materials and type of bearing and lubrication required.

Hoping that this list of questions helps you better visualize your needs, You can contact Prosynergic to discuss your application it will be our pleasure to help you.

Info@prosynergic.com

Increase the quality and lower the costs of your electric panels is possible with Noark Electric

Noark is a manufacturer of  control and circuit breaker products. Noark is a division of Chint, Asia’s largest manufacturer of electrical products. Noark’s mission is to quality produce low voltage components for the American, Canadian and European market.

The north American headquarters is in Pomona, California.

The product stands out with a limited warranty of 5 years on their components.

If you are looking to reduce the cost of your control panel and increase the quality Noark products is what you need.

One of the company’s flagship product is the moulded case circuit breaker  Ex9 series, The product it’s seen awarded a Red dot Award at the launch in Germany.

Its dual arc break design and the use of ball bearing is an innovation for the industry. Available from 15 amps to 1200 amps – 600 VAC DC for the Canadian market and 690 Volts for the European market. Three  level of breaking capacity are available . The S , N and the H ( 20 to 65 ka 600 Volt) and ( 35 to 100Ka – 480 Volt )

For more information contact Prosynergic 514-500-7513

Prosynergic is the agent for Noark in Quebec and Ontario

Info on Noark’s website

http://na.noark-electric.com/noark-productLoader.php?PRODUCT=MCCB001

😍

Why not replace your fuses with mini circuit breakers?

Noark Electric offers mini circuit breakers ( MCB ) approved for UL489 or CSA C22.2 no.5 branch protection

Thanks to their low prices and small footprints, they can replace fuse and fuse block without increasing the price of your projects. The advantage of circuit breakers is the assurance that the user does not replace the protection with a different caliber. They also offer at no extra cost a trip indicator.

As automation solutions are increasingly autonomous, it allows remote verification of their states, on- off and  or tripped . We also offer shunt trip and under voltage trip coil .

They are available in version 1 pole, 2 poles, and 3 poles, and with different curves (B,C,D, ) In 4 different families

  1. : The B1H series good for Y 480v or 277 volts maximum
  2.  The versatile B1N version , CA and CC 240 VAC – 60 VDC and for the two poles 125 VDC
  3. The B1NQ 120 240 V version
  4. The B1A 60 VDC version

 

It is mountable on Din rail and Noark is offering accessories like, trip coils, auxiliary alarm contacts, and a completely safe finger safe Busbar systems.

It is covered by a 5-year warranty, Noark tests each of them short-circuit and overload before it leaves the factory to ensure you run smoothly.

With the Noark MCB the fuse race to restart your machine at 4 am is over and you will no longer have to pay the lost hours of your machine technician in search of the right fuse all over the town.

For more info contact Prosynergic, your Noark agent for Quebec and Ontario

Info@prosynergic.com