Increase the quality and lower the costs of your electric panels is possible with Noark Electric

Noark is a manufacturer of  control and circuit breaker products. Noark is a division of Chint, Asia’s largest manufacturer of electrical products. Noark’s mission is to quality produce low voltage components for the American, Canadian and European market.

The north American headquarters is in Pomona, California.

The product stands out with a limited warranty of 5 years on their components.

If you are looking to reduce the cost of your control panel and increase the quality Noark products is what you need.

One of the company’s flagship product is the moulded case circuit breaker  Ex9 series, The product it’s seen awarded a Red dot Award at the launch in Germany.

Its dual arc break design and the use of ball bearing is an innovation for the industry. Available from 15 amps to 1200 amps – 600 VAC DC for the Canadian market and 690 Volts for the European market. Three  level of breaking capacity are available . The S , N and the H ( 20 to 65 ka 600 Volt) and ( 35 to 100Ka – 480 Volt )

For more information contact Prosynergic 514-500-7513

Prosynergic is the agent for Noark in Quebec and Ontario

Info on Noark’s website

http://na.noark-electric.com/noark-productLoader.php?PRODUCT=MCCB001

😍

Why not replace your fuses with mini circuit breakers?

Noark Electric offers mini circuit breakers ( MCB ) approved for UL489 or CSA C22.2 no.5 branch protection

Thanks to their low prices and small footprints, they can replace fuse and fuse block without increasing the price of your projects. The advantage of circuit breakers is the assurance that the user does not replace the protection with a different caliber. They also offer at no extra cost a trip indicator.

As automation solutions are increasingly autonomous, it allows remote verification of their states, on- off and  or tripped . We also offer shunt trip and under voltage trip coil .

They are available in version 1 pole, 2 poles, and 3 poles, and with different curves (B,C,D, ) In 4 different families

  1. : The B1H series good for Y 480v or 277 volts maximum
  2.  The versatile B1N version , CA and CC 240 VAC – 60 VDC and for the two poles 125 VDC
  3. The B1NQ 120 240 V version
  4. The B1A 60 VDC version

 

It is mountable on Din rail and Noark is offering accessories like, trip coils, auxiliary alarm contacts, and a completely safe finger safe Busbar systems.

It is covered by a 5-year warranty, Noark tests each of them short-circuit and overload before it leaves the factory to ensure you run smoothly.

With the Noark MCB the fuse race to restart your machine at 4 am is over and you will no longer have to pay the lost hours of your machine technician in search of the right fuse all over the town.

For more info contact Prosynergic, your Noark agent for Quebec and Ontario

Info@prosynergic.com

New In Machine Safety!

Prosynergic represents ASO safety products

Aso Safety manufactures safety mats, sensitive edge ,  bumper  and accessory. As a solution manufacturer for presence detection and shear protection. Whether for automated door protection, machine security or mobile equipment ASO solutions are robust, flexible and easy installed. Contact us for more information or a visit

Prosynergic is now the agent for Schneeburger linear technology

Prosynergic is now the agent for Schneeberger Linear Technology, a manufacturer of linear guidance solution. Founded in 1923 Schneeburger have developed several innovative technologies. In 1945 they created linear technology without friction and a few years ago they integrated a position measurement technology with  linear guide rail. It creates  the AMS, a guidance system with linear ruler  in a single piece. They also offer Mineral casting , that give your the performance of Granite at a fraction of the cost. Also available from Schneeberger ,are high precision table and complete positioning systems

For more details contact us or visit the Schneeburger website

https://www.schneeberger.com

Schneeburger product

New products, lightweight EOAT for Robots from Anibus 3D

Prosynergic now represents the products of Anubis 3D. This Canadian manufacturer uses a new SLS-type 3D printing technology that allows the production of volume parts. Unlike other printing process the parts are ultra-precise, and their properties do not change in time. The final product is robust and can be used as a production part. The result is more competitive and flexible than the injection processes for low and medium volume parts.

Anubis 3D has therefore specialised in the manufacture of robots tools because the properties of the final products are ideal for the industry. The robots tools must be robust, lightweight and flexible, all of which are the qualities that make it. Thanks to the next generation computer aided design using artificial intelligence, the tools are developed by our teams of engineers according to the customer’s need and are manufactured in a few days. The built-in tool include air conduit and the shape is optimised for any force applied.

Anubis 3D has several projects that have been saved by our technology. The large weight of conventional tools tax the robots that are struggling to reach the required production rate. In several applications the tool is heavier than the load to be moved. The Anubis 3D technology is collaborative robot friendly. This type of robots less powerful than conventional robots will be well served by the low-weight tools Anubis 3D produce.

Please contac Us for a free quote

info@prosynergic.com

https://anubis3d.com/

Lightweight robot tool
EOAT robot tools

New Delta robots at Macro Dynamics the Tri-Bot

 

Macron Dynamic now offers a Delta robot named the Tri-bot

Designed from proven linear components Macron now offers a high speed option to the packaging industry

With his modular design it is possible to build custom unit on a large scale

The standard version is capable of 132 Pic per minute and a precision more or plus or minus ten thousandths of an inche

Contact Prosynergic for more details

Info@prosynergic.com

TR Electronic offers a new SIL 3 encoder in the enclosure of the popular 58 series

SIL 3 Encoder

Tr now offers an encoder  SIL 2 Pld and SIL 3 Ple in the enclosure of the popular 58 series. The absolute Multiturn encoder can be ordered   with hollow shaft type or  shaft type. Ideal for applications that require a safe position signal

The more compact format will allow you to use it in tight space

For now it is available in Profinert/PROFIsafe

Contact  Prosynergic for details

info@prosynergic.com

Magneto restrictive linear encoder for position measurement for hydraulic cylinder or other

TR Electronic offers a complete range of linear coders to report the distance travelled from an axis. The position is given in an absolute way. As usual TR offers us a wide array of networks on this series (IO link, Ethernet IP, SSI, Ethercat, Can Open, Device net, PowerLink, Sercos, Profibus, Analogue) several different configurations are available including a modular version Up to 20 meters long.

The rod versions are available for insertion in a hydraulic cylinder and is pressure resistant

For more information

https://www.tr-electronic.com/products/linear-encoders.html

Prosynergic

Macron and Prosynergic will be present at ATX Montreal

Thank’s for attending  !

Visit us at the ADM Montreal exhibit at Booth 1216

This year the exhibition combines several

Linear Actuator

Macron Dynamic is a manufacturer of linear motion Cartesian systems and solutions. Macron products are manufactured with the highest quality materials assembled in North America and designed to withstand high-cycle applications. The result is a combination of versatility, durability and virtually maintenance-free operation.

Linear Robotic, Gantry, Linear Belt  Actuator, Stainless Actuator, Rod Actuator, Custom Solution , TBot, Hbot

https://www.macrondynamics.com/

Show web site :

https://admmontreal.com/home

See you there !

 

 

Industry 4.0 do we have a choice?

Canada, which is not successful to filled the productivity gap with the other industrialized countries. So we can’t not miss the next turning point of the 4.0 industry. The next industrial Revolution, like any other, will create wealth, winners and losers. I prefer to be a winner and you? Quebec manufacturers who once pulled their game with a low dollar, lower overall costs and a sense of resourcefulness in Quebec will have more and more difficulty in doing so. Several companies did not even take the turn completely 3.0. The well-structured company, equipped with the latest technology will thrive thanks to automation. Their product will be better built. They will have fewer production stops, their customers will know the delivery dates and will be delighted. Do we have a choice? Well no more than Ford’s competitors had, with the chain production.

Ford was doing thing, faster, better cheaper!

The basis of change begins with the simplification of work and the automation of repetitive processes. In the majority of cases the result is a higher rate, more quality, more consistency and more safety for the workers who works with the machines. I think Canada  is well positioned. We have invested in our schools and we have a good pool of educated people in addition to having a good basin of aging machinery that needs to be changed. Interest rates are relatively low. We only have to look at the Chinese who currently install more robots than any other country in the world and yet the labor is plentiful and cheap? They may have understood that it is inevitable and strategic.

Now you have to start planning and investing before your company loses its relevance in the market and your low market position makes financing of the new technology impossible. I will not hide that there is a lot of work to arrive at the factory 4.0. But the profits are immense not to mention that the generation of millennial that follows may not want to work in a factory or repetitive work is difficult and stunning or even in a factory where the information is non-existent. This generation is accustomed to finding its info with Google. It will be difficult to understand that nothing is available on your production line. That the reports are made by hand by collecting given data on the right and left. I think they’re right.

So in my humble opinion the turning point is inevitable, if not your industry is doomed, because your competitors will do things better, cheaper and faster than you. Further recruiting new employees to work in outdated factories will be impossible. You don’t want to live the inverted Hygrade phenomenon, fewer people eat it because it is not fresh. Or the inverted spiral that is so scary to Bill Gates.

When buying a car or a new smart phone people want the latest technology, why not do the same thing in our factories. Don’t we spend three quarters of our lives at work?

Need help setting your priorities? Contact us. We have several solutions that are part of the 4.0 industry approach

Intelligent sensor, security management, quality control, networking and robotics Infrastructure.

Gilles Laberge

Prosynergic