Many Solutions at Di-soric for detecting your Labels

Label detection can become difficult with the multitude of types of products to be detected on the market. The new packaging is very interesting from a marketing point of view, with transparent, metallic or cardboard areas. But they offer a detection challenge. The diversity of materials, thickness and their varied densities no longer allow the generic photo sensors to function well in all situation. Di-soric have several models on the market that can solve this challenge. They have Photo versions with good value , then they have capacitive versions, good for almost everything except metal labels and built-in booklets and they have the ultrasound which is the most versatile of the family that can work in all situation. On top they have integrated I-O link technology that make them ready for industry 4.0 challenge.

Family

OGUTI photo-electric fork sensor

KSSTI Capacitive Fork Sensor

UGUTI Ultrasonic Sensor

 

Contact us for a quote, demo  or advice for your application

Info@prosynergic.com

New! TR Electronic CIP safety coder

CD 582CD_582-FS Ethernet/IP - the world's smallest absolute encoder with functional safety certification

We have exciting news to share from TR Electronic. They are the first and only coder manufacturer to offer an CIP hollow shaft safety encoder. In addition it is the smallest on the market. Super interesting for Rockwell plc users. You can now get the speed or position of an axis directly from an encoder on your safety network. The encoder meets the safety certification SIL3 (PLe) or SIL2 (PLd). The complete redundancy of the system is provided by two independent absolute coder cores in a single 58 mm case. An additional incremental output is available (HTL, TTL or analog Sin/ Cos). Fully configurable via the Ethernet/IP protocol. Thanks to the CIPsafety Protocol for on-the-fly programming of angular velocity calculation, entry/exit ratio and coder’s preset position values will be available at the PLC

For more information
contact us

Prosynergic is now the agent for Schneeberger linear technology

Prosynergic is now the agent for Schneeberger Linear Technology, a manufacturer of linear guidance solution. Founded in 1923 Schneeburger have developed several innovative technologies. In 1945 they created linear technology without friction and a few years ago they integrated a position measurement technology with  linear guide rail. It creates  the AMS, a guidance system with linear ruler  in a single piece. They also offer Mineral casting , that give your the performance of Granite at a fraction of the cost. Also available from Schneeberger ,are high precision table and complete positioning systems

For more details contact us or visit the Schneeburger website

https://www.schneeberger.com

Schneeburger product

TR Electronic offers a new SIL 3 encoder in the enclosure of the popular 58 series

SIL 3 Encoder

Tr now offers an encoder  SIL 2 Pld and SIL 3 Ple in the enclosure of the popular 58 series. The absolute Multiturn encoder can be ordered   with hollow shaft type or  shaft type. Ideal for applications that require a safe position signal

The more compact format will allow you to use it in tight space

For now it is available in Profinert/PROFIsafe

Contact  Prosynergic for details

info@prosynergic.com

Magneto restrictive linear encoder for position measurement for hydraulic cylinder or other

TR Electronic offers a complete range of linear coders to report the distance travelled from an axis. The position is given in an absolute way. As usual TR offers us a wide array of networks on this series (IO link, Ethernet IP, SSI, Ethercat, Can Open, Device net, PowerLink, Sercos, Profibus, Analogue) several different configurations are available including a modular version Up to 20 meters long.

The rod versions are available for insertion in a hydraulic cylinder and is pressure resistant

For more information

https://www.tr-electronic.com/products/linear-encoders.html

Prosynergic

Industry 4.0 do we have a choice?

Canada, which is not successful to filled the productivity gap with the other industrialized countries. So we can’t not miss the next turning point of the 4.0 industry. The next industrial Revolution, like any other, will create wealth, winners and losers. I prefer to be a winner and you? Quebec manufacturers who once pulled their game with a low dollar, lower overall costs and a sense of resourcefulness in Quebec will have more and more difficulty in doing so. Several companies did not even take the turn completely 3.0. The well-structured company, equipped with the latest technology will thrive thanks to automation. Their product will be better built. They will have fewer production stops, their customers will know the delivery dates and will be delighted. Do we have a choice? Well no more than Ford’s competitors had, with the chain production.

Ford was doing thing, faster, better cheaper!

The basis of change begins with the simplification of work and the automation of repetitive processes. In the majority of cases the result is a higher rate, more quality, more consistency and more safety for the workers who works with the machines. I think Canada  is well positioned. We have invested in our schools and we have a good pool of educated people in addition to having a good basin of aging machinery that needs to be changed. Interest rates are relatively low. We only have to look at the Chinese who currently install more robots than any other country in the world and yet the labor is plentiful and cheap? They may have understood that it is inevitable and strategic.

Now you have to start planning and investing before your company loses its relevance in the market and your low market position makes financing of the new technology impossible. I will not hide that there is a lot of work to arrive at the factory 4.0. But the profits are immense not to mention that the generation of millennial that follows may not want to work in a factory or repetitive work is difficult and stunning or even in a factory where the information is non-existent. This generation is accustomed to finding its info with Google. It will be difficult to understand that nothing is available on your production line. That the reports are made by hand by collecting given data on the right and left. I think they’re right.

So in my humble opinion the turning point is inevitable, if not your industry is doomed, because your competitors will do things better, cheaper and faster than you. Further recruiting new employees to work in outdated factories will be impossible. You don’t want to live the inverted Hygrade phenomenon, fewer people eat it because it is not fresh. Or the inverted spiral that is so scary to Bill Gates.

When buying a car or a new smart phone people want the latest technology, why not do the same thing in our factories. Don’t we spend three quarters of our lives at work?

Need help setting your priorities? Contact us. We have several solutions that are part of the 4.0 industry approach

Intelligent sensor, security management, quality control, networking and robotics Infrastructure.

Gilles Laberge

Prosynergic

 

New TR Electronic encoder SIL 3 PL e!

Tr Electronic known for their programmable coders now offers a programmable absolute encoder approved for functional safety SIL 3 PL e. Available on different bus it integrates with different controllers to give you fonctional safety . Unlike conventional encoder the features are implemented in the encoder. For example, the safe speed monitoring or the safe position monitoring is available directly in the encoder.  The programming is done in the software of the client controller using a profile downloaded in this one. Available on different network (Profinet, Profibus, Ethercat, Open Safety, Powerlink) are easy to integrate .

Http://trelectronic.com/article/stage-technology

Very interesting for the entertainment industry, where  man and machine must have to cohabited

As shown in the attached application

For more information contact Prosynergic or Tr Electronic

Your length measurement system is not accurate?

Why not looking at the micro Speed Elovis sensor (non-contact speed and length measurement)

A new contactless technology is available to replace the technology with encoder and wheel in contact with the material. Laser-based technology is capable of measuring speed and displacement, thereby eliminating the slippage and maintenance problems associated with wheel systems. In addition to the much greater accuracy of this technology allows to self-finance its investment. The system with an error of only. 05% VS 2% for coded wheel systems allows you to save thousands of dollars annually in material and customer complaint.

 

Prosynergic represents Elovis in Canada!

ELOVIS Gmbh develops, produces and markets electronic and optical measurement systems for the industry. ELOVIS products provide measurement, transmission and recording of productivity parameters, high-precision quality and process, and long-term stability. We focus on measuring lengths and speed without contact, as much as acquiring wireless data. Non-Elovis Contact coders are an alternative to the wheel with contact and conventional encoders. An interesting way to stop the slippage and loss of material when measuring length.

Www.elovis.de