What do you need to know to choose an Actuators or Linear Robots?

What questions to ask when choosing an actuator or linear robots to avoid selection errors

What Precision I’m looking for (Precision and repeatability), this will help us choose which family and type of product we will have to choose the solution in, and the need to have a linear coder and a closed loop on the actual position of the system.

What orientation will the system be installed? Vertical, horizontal, angled, The forces applied to the cart will be different and the gravitational force will have to be taken into account.

What speed  , and acceleration the system have to support ?  The engine capacity, Drive and, support, bearing will have to withstand the forces of acceleration and deceleration of the system and be able to deliver the required performance

What Length ? Including acceleration and deceleration zone to achieve required speed

What’s the Load ?  The weight and its distribution as well as the forces applied with their directions. Any loads deported from the rolling system will result in a moment of force, which the system must be able to withstand without introducing a position error. Any workload performed by the actuator, (cut, push, pull, polish) , Include the weight of the tool, servo motor, gearbox and other axes.

What is the work cycle, and durability required by the application

Other factors to consider, safety, brake for the load, other forces, motor manufacturer and model

What type of environment the product will be subjected to, temperature, debris, chemical, wash down , type of maintenance. Influences the selection of materials and type of bearing and lubrication required.

Hoping that this list of questions helps you better visualize your needs, You can contact Prosynergic to discuss your application it will be our pleasure to help you.

Info@prosynergic.com

Prosynergic is now the agent for Schneeberger linear technology

Prosynergic is now the agent for Schneeberger Linear Technology, a manufacturer of linear guidance solution. Founded in 1923 Schneeburger have developed several innovative technologies. In 1945 they created linear technology without friction and a few years ago they integrated a position measurement technology with  linear guide rail. It creates  the AMS, a guidance system with linear ruler  in a single piece. They also offer Mineral casting , that give your the performance of Granite at a fraction of the cost. Also available from Schneeberger ,are high precision table and complete positioning systems

For more details contact us or visit the Schneeburger website

https://www.schneeberger.com

Schneeburger product

New products, lightweight EOAT for Robots from Anibus 3D

Prosynergic now represents the products of Anubis 3D. This Canadian manufacturer uses a new SLS-type 3D printing technology that allows the production of volume parts. Unlike other printing process the parts are ultra-precise, and their properties do not change in time. The final product is robust and can be used as a production part. The result is more competitive and flexible than the injection processes for low and medium volume parts.

Anubis 3D has therefore specialised in the manufacture of robots tools because the properties of the final products are ideal for the industry. The robots tools must be robust, lightweight and flexible, all of which are the qualities that make it. Thanks to the next generation computer aided design using artificial intelligence, the tools are developed by our teams of engineers according to the customer’s need and are manufactured in a few days. The built-in tool include air conduit and the shape is optimised for any force applied.

Anubis 3D has several projects that have been saved by our technology. The large weight of conventional tools tax the robots that are struggling to reach the required production rate. In several applications the tool is heavier than the load to be moved. The Anubis 3D technology is collaborative robot friendly. This type of robots less powerful than conventional robots will be well served by the low-weight tools Anubis 3D produce.

Please contac Us for a free quote

info@prosynergic.com

https://anubis3d.com/

Lightweight robot tool
EOAT robot tools

New Delta robots at Macro Dynamics the Tri-Bot

 

Macron Dynamic now offers a Delta robot named the Tri-bot

Designed from proven linear components Macron now offers a high speed option to the packaging industry

With his modular design it is possible to build custom unit on a large scale

The standard version is capable of 132 Pic per minute and a precision more or plus or minus ten thousandths of an inche

Contact Prosynergic for more details

Info@prosynergic.com

Macron and Prosynergic will be present at ATX Montreal

Thank’s for attending  !

Visit us at the ADM Montreal exhibit at Booth 1216

This year the exhibition combines several

Linear Actuator

Macron Dynamic is a manufacturer of linear motion Cartesian systems and solutions. Macron products are manufactured with the highest quality materials assembled in North America and designed to withstand high-cycle applications. The result is a combination of versatility, durability and virtually maintenance-free operation.

Linear Robotic, Gantry, Linear Belt  Actuator, Stainless Actuator, Rod Actuator, Custom Solution , TBot, Hbot

https://www.macrondynamics.com/

Show web site :

https://admmontreal.com/home

See you there !

 

 

Industry 4.0 do we have a choice?

Canada, which is not successful to filled the productivity gap with the other industrialized countries. So we can’t not miss the next turning point of the 4.0 industry. The next industrial Revolution, like any other, will create wealth, winners and losers. I prefer to be a winner and you? Quebec manufacturers who once pulled their game with a low dollar, lower overall costs and a sense of resourcefulness in Quebec will have more and more difficulty in doing so. Several companies did not even take the turn completely 3.0. The well-structured company, equipped with the latest technology will thrive thanks to automation. Their product will be better built. They will have fewer production stops, their customers will know the delivery dates and will be delighted. Do we have a choice? Well no more than Ford’s competitors had, with the chain production.

Ford was doing thing, faster, better cheaper!

The basis of change begins with the simplification of work and the automation of repetitive processes. In the majority of cases the result is a higher rate, more quality, more consistency and more safety for the workers who works with the machines. I think Canada  is well positioned. We have invested in our schools and we have a good pool of educated people in addition to having a good basin of aging machinery that needs to be changed. Interest rates are relatively low. We only have to look at the Chinese who currently install more robots than any other country in the world and yet the labor is plentiful and cheap? They may have understood that it is inevitable and strategic.

Now you have to start planning and investing before your company loses its relevance in the market and your low market position makes financing of the new technology impossible. I will not hide that there is a lot of work to arrive at the factory 4.0. But the profits are immense not to mention that the generation of millennial that follows may not want to work in a factory or repetitive work is difficult and stunning or even in a factory where the information is non-existent. This generation is accustomed to finding its info with Google. It will be difficult to understand that nothing is available on your production line. That the reports are made by hand by collecting given data on the right and left. I think they’re right.

So in my humble opinion the turning point is inevitable, if not your industry is doomed, because your competitors will do things better, cheaper and faster than you. Further recruiting new employees to work in outdated factories will be impossible. You don’t want to live the inverted Hygrade phenomenon, fewer people eat it because it is not fresh. Or the inverted spiral that is so scary to Bill Gates.

When buying a car or a new smart phone people want the latest technology, why not do the same thing in our factories. Don’t we spend three quarters of our lives at work?

Need help setting your priorities? Contact us. We have several solutions that are part of the 4.0 industry approach

Intelligent sensor, security management, quality control, networking and robotics Infrastructure.

Gilles Laberge

Prosynergic

 

R + W

  • Mechnical Solution for precision coupling for
  • Packaging, printing, machine tools, robotics, servo
  • Backlash Free

Couplings high performance for a global market  

 

Our guiding principle, DRIVE, is a mutual appeal that unifies our 220 employees: manufacture couplings at high metal bellows of range, elastomeric couplings, disc couplings and torque for the world market limiters; precisely to the micrometer.

With DRIVE, we present ourselves as a leader and the market dynamic, reliable, innovative and versatile technology that strives to expand its activities in developing and improving further our daily activity.

We are close to the customer, solution-oriented, cost-effective and flexible, with an exceptional commitment. This is how we reach our standards, resulting from the details of our work.

Get in touch with us. We have the right DRIVE! For all transmissions of torque!

Development is our strength!

Since 1990, R + W has a Department dedicated to R & D for new progress and special solutions involving linkages of precision and industrial drive, using an talented engineering team based on application requirements specific customer.

With the collaboration of the universities of Bayreuth and Aachen (Germany), R + W is able to test its products newly designed and analyzed on the latest equipment.

This Department is responsible for several milestones in coupling technology, such as the first two-piece bellows coupling and coupling of security SL ULTRALIGHT.

Currently, it is the goal of R + W to develop at least a completely new series of couplings to present on the world market each year. In addition to new product developments, our team has worked extensively on high-level engineering projects, including security customized to the International Space Station and the couplings couplings of bellows blind to the larger machine at CERN in the world

 

R+W safety Coupling technology

 

 

www.RW-America.com

safety coupling

Macron Dynamic

Cartesian robots – systems gantry – positioning table – linear actuator

  • Macron Dynamics Solution for
  • Pick & Place
  • Sorting, palletizing
  • Order management
  • Automation

Positioning solutions since 1987

Business context

Based in Philadelphia, Pennsylvania, today, Macron manufactures products of linear Robotics and automation systems designed to help clients to improve productivity and reduce costs through innovative components of movement and high quality.

Defence and aerospace, manufacturing and packaging, medical and pharmaceutical products, film production and theater, the Macron products are used in applications requiring automation of quality… regardless of the market.

Solutions of automation for today’s challenges

Solution of palletizer:

Custom Actuator for outside use, maintenance free

www.macrondynamics.com

 Linear actuator